FS-300 SELF CLEANING INLINE WATER FILTER (300,000 LPH)
SERUS RUSSIA
Industrial self-cleaning inline water filter with direct flushing for purification of water from mechanical impurities.
The capacity of 300 m3 per hour for boiler houses, apartment buildings, cottage settlements, food production, agriculture, irrigation is the best option for price and performance.
Industrial main-line filter with direct-flow washing for purification of water from mechanical impurities.
A high-performance filter with a filtration fineness of 1 micron is designed for liquid filtration up to 300 m3 per hour.
Serus main inline water filter is used for:
-filtration of water in systems of the hot and cold water supply of industrial and individual use;
-filtration of food products: milk, vegetable oils, juices, water preparation for good manufacturing standards.
-filtration of light oil products: gasoline, aviation kerosene, diesel fuel, technical oils.
Application area:
-purification of water in apartment buildings, cottages and cottage settlements;
-water treatment in swimming pools
-sewage treatment in the industry
-boiler rooms
-heat power engineering
-food industry
-oil industry
-metallurgical industry
-chemical industry
-pharmaceuticals
-perfumery
The filter element is made of stainless high-alloy steel in the form of a string wound on a frame.
Nano filter Solution is the Supplier of Clean filtered water with a nanotechnology water filter system used for Domestic, Agriculture, Animal Farming, Industrial Water cleaning purposes.
Characteristics
Performance - 300 M³ /hr (300,000 LPH)
Filtration fineness - 10-15 microns (1, 30, 50 microns on request)
Maximum working pressure- 16 Bar
Minimum working pressure- 4 Bar
Connection size - 6 inch (flanged DN150)
Maximum temperature- 195°C
Dimensions (mm) 1160x700x450
Approximate Weight 95 kg
Design
The fine mechanical cleaning Serus filter FS-300 consists of a body with an internal thread, a string filter element, a water structurer, a drain valve, a bulb, a pressure gauge. The drain valve provides a direct flushing of the filter. The filter is easy to maintain and operate and has compact dimensions.
Operating principle
The Serus water filter has two modes of operation: filtration and flushing.
In the filtration mode, water penetrates the filter element inside and leaves the filter cleaned.
All mechanical impurities remain outside the filter element at the bottom of the flask .The rinse mode is switched on / off by opening drainage valve at the bottom of the flask During washing, the water stream removes all accumulated debris from both the surface of the filter element and the bottom of the filter housing.The operation of the drain valve can be done manually or with a automatic flushing device.
Materials
The case and the filter flask are made of stainless steel AISI 304 (medical, food steel)
stainless steel generator with magnetic system of rare earth metals
Filtering string element of fine cleaning from high-alloyed stainless steel
NBR seals
Installation:
Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter. Maintenance of the filter is done without dismantling. The filter position is only in the vertical position with the drain valve pointing down. Installation in a confined space is possible.
Filter Advantages
-high cleaning efficiency
-simple, direct flushing
-compact size
-maintenance of filter done without dismantling from pipeing system.
-Filter and filter cartridge is guaranteed to operate properly for 10 years guaranteed, without buying any additional filter cartriges.
Application
Serus water filter FS-300 is used for domestic and commercial purposes for the continuous supply of filtered cold and hot water at normal pressure in the pipeline. Prevents the penetration of foreign matter: rust particles, hemp fibers, grains of sand, etc.