Ventajas y beneficios de los sistemas de filtro de agua en línea autolimpiables

12/05/2020

Phone: +7 903 254-44-76

Advantages and Benefits of Self Cleaning Inline Water Filter Systems

What is a self-cleaning inline water filter and what is it for?

People looking for water filter options often wonder. What is a mainline water filter? The main water filter is a filter device that mounts directly to the water supply and is used to produce purified hot or cold water. The main filter can be equipped with replaceable filter elements of different types. Today we will talk about the main inline and mechanical water filters. They are used for domestic, commercial and industrial needs. For example, to protect home heaters and pipes from harmful impurities in the water.

What characteristics do the main self-cleaners of mechanical cleaning in-line water filters have?

The main characteristics of mechanical water purification filters are the size of the holes through which the water is filtered from mechanical impurities and their capacity with minimal hydraulic resistance (filter capacity). For our self-cleaning inline water filters, the capacity ranges from 1 cubic meter per hour to 300 cubic meters per hour. Depending on the selectivity of the filter chosen, according to our line of water filters where the filter cartridge does not need to be changed and they are capable of filtering mechanical impurities down to 1 micron, which makes it possible to use these filters as a replacement for both Filters of mesh and cartridge type filters.

Why do you need self-cleaning of the main online water filters?

Self-cleaning filters provide purification of coarse and fine water from mechanical impurities and protect against pressure drops in the network. By the washing method, the filters can be divided into filters with direct flow and backwash.

How do direct flow filters work?

The principle of operation of these filters is similar to the operation of cartridge filters: when filtering, all mechanical impurities are retained by the filter element (mesh), and the purified water from mechanical impurities reaches the consumer. But there is a significant difference: the "cartridge" does not change but is washed with untreated water. With the proper operation of the wash filter and taking into account the characteristics of the filtered water, the filter screen is usually sufficient for 1-2 years.

Direct discharge filters have a bottom drain that opens with a ball valve. A drain fitting is installed on the tap, to which a flexible hose or plastic tube is supplied. When the filter is washed, the ball valve in the drain opening opens and the water removes mechanical impurities from the screen. In order to increase the life of the rack, it is recommended periodically (after 5-6 washes) to disassemble the filter and rinse the rack and flask with a brush to remove any contaminants trapped in the holes in the rack. Do not wash the water flow.

How do backwash filters work?

The backwash technology allows you to consistently provide the consumer with purified water, even when washing the screen filter. The backwash filter screen consists of a main lower part and an additional upper section. In the filtering mode, the upper section is in the closed state, and the water passes through the large lower section in the direction from outside to inside. When the ball valve is opened, the filter backwash mode is activated, in which the entire mesh element goes down. In this position, the water supply stops and passes through the small upper section, where, after cleaning, the water flow is divided into two flows: one for the consumer and one for backwashing.

The backwash flow rotates the turbine and, after passing through it with acceleration, cleans the lower section of the filter from the inside to the outside. Therefore, the main lower section under the inlet pressure is completely cleaned over the entire surface of the grate. After closing the ball valve, the wash filter automatically returns to filtration mode. What are self-cleaning filters? Self-cleaning filters can be called fully automatic, self-cleaning, and they work only at the expense of water pressure. Because of this, it is not necessary to remove the filter element for manual cleaning. In the backwash cycle, the mainstream will not be interrupted.

The main characteristics and advantages of these filters: Automatic washing only due to water pressure. Cleaning of grates with large filtration area. Continuous flow during backwash.

Self Cleaning Nano Water Filter | Purifier | Filtration | Treatment System - No Electricity - No Chemicals - No Cartridge
Water Filter Capacity of 1000 Liter Per Hour to 300000 Liters Per Hour